Comment Code TRT

Turns on angle rotary mill support. For showing the toolpath when rotary milling with the tool. This command angles the tool at the same angle as the rotary table command so it is always shown perpendicular to the part.

O0440

G90

G00X0Y-19.0

G01Y-20.300F30.0

G01Y-20.945F5.0

G91C-25.F15.0

G90

G01Y-19.0F30.0

M99

The CAD file is in the normal X,Y view. The tool drawing is made in the position it would appear at 0 degrees.

Ex.: (TRT )

See also: Comment Codes

_________________________________________________________________