DNC Multi-Server Option

Multi-Server mode can be turned on from the App Settings window. Normally, DNC Server has one Comm port open at a time for one machine. In Multi-Server mode all comm ports going to all the machines are on at the same time. This way, you can upload or download to more than one machine at a time. You can drip feed to more than one machine at a time. You don't need to use this feature if you are using DNC Server when only connected to one machine at a time, like with a laptop connected to one machine, or are using switch boxes to connect to one machine at a time. Or when you never communicate with more than one machine at a time. Normally, this mode is transparent and everything works the same way as in Single mode. Multi- Serve can be configured to any number of machines.
DNC Server
Multi Server
support@i-logic.com
Copyright © 2020 by i-Logic Software
This feature must be turned on in Main Menu - Settings - App Settings - Options.
This shows a "Machines" tab on the left along with the "Files" tab.
The Machines tab shows a list of all the configured machines and each one is always connected to its Comm port. Normally, the operation in Multi-Server mode is transparent and you never need to look at the Machines Tab. Everything works like it does in Single mode, but the Machine list does allow you to check the status of all the machine connections. When programs are being sent to the machines a progress bar shows up on the list. You can check for serial ports that were not able to initialize, and duplicate comm ports.
What happens when you have two different formats for the same machine? Normally, each machine would have a separate serial port number, but if you need two format settings to the same machine comm port then you can click on the machine to be activated and the others having the same port will be de-activated.
A Multi-Server Option license allows you to install the option on either Single or Site License of DNC Server..  The Order Reference Number you receive in the email you will enter into Activation window   Buy License for Multi-Server Option $30.00
After purchase, go to Main Menu - Help - Activation and enter the Order Reference Number and press Add Option Code button
Note: You need to purchase and activate the standard DNC Server software before you purchase this.
Each of the Options can be turned on or off. Go to App Settings - Options and check the Use Multi-Server checkbox.

DNC Multi-Server Option

Multi-Server mode can be turned on from the App Settings window. Normally, DNC Server has one Comm port open at a time for one machine. In Multi-Server mode all comm ports going to all the machines are on at the same time. This way, you can upload or download to more than one machine at a time. You can drip feed to more than one machine at a time. You don't need to use this feature if you are using DNC Server when only connected to one machine at a time, like with a laptop connected to one machine, or are using switch boxes to connect to one machine at a time. Or when you never communicate with more than one machine at a time. Normally, this mode is transparent and everything works the same way as in Single mode. Multi-Serve can be configured to any number of machines.
Multi Server
DNC Server support@i-logic.com
This feature must be turned on in Main Menu - Settings - App Settings - Options.
This shows a "Machines" tab on the left along with the "Files" tab.
The Machines tab shows a list of all the configured machines and each one is always connected to its Comm port. Normally, the operation in Multi-Server mode is transparent and you never need to look at the Machines Tab. Everything works like it does in Single mode, but the Machine list does allow you to check the status of all the machine connections. When programs are being sent to the machines a progress bar shows up on the list. You can check for serial ports that were not able to initialize, and duplicate comm ports.
What happens when you have two different formats for the same machine? Normally, each machine would have a separate serial port number, but if you need two format settings to the same machine comm port then you can click on the machine to be activated and the others having the same port will be de-activated.
A Multi-Server Option license allows you to install the option on either Single or Site License of DNC Server..  The Order Reference Number you receive in the email you will enter into Activation window   Buy License for Multi-Server Option $30.00
Note: You need to purchase and activate the standard DNC Server software before you purchase this.
Copyright © 2020 by i-Logic Software
After purchase, go to Main Menu - Help - Activation and enter the Order Reference Number and press Add Option Code button
Each of the Options can be turned on or off. Go to App Settings - Options and check the Use Multi- Server checkbox.